Axles, suspension & steering 35 factory variants

Axle weight front technical

One characteristic of the Scania factory specification (FPC). Every vehicle leaves the factory with exactly one of the variants below — for example 6500 kg — and SDP3 shows it in the chassis specification.

Factory variants

6500 kg

7000 kg

6000 kg

7500 kg

2 x 6500 kg

2 x 7000 kg

7200 kg

8000 kg

2 x 6000 kg

6800 kg

8200 kg

6300 kg

7100 kg

6700 kg

2 x 8000 kg

8500 kg

9000 kg

2 x 6700 kg

2 x 7100 kg

2 x 8500 kg

2 x 9000 kg

2 x 7500 kg

7800 kg

6200 kg

2 x 10000 kg

2 x 12000 kg

12000 kg

10000 kg

11000 kg

2 x 11000 kg

2 x 8200 kg

4300 kg

4800 kg

5000 kg

5600 kg

How to read it

Axle weight front technical belongs to the axles, suspension & steering group of the Scania specification. The variant tells you what the vehicle was ordered with . The specification is fixed at production: if the vehicle was modified afterwards (a PTO added, an axle converted), the FPC list still shows the original order, while the SOPS parameters show the current configuration of each control unit. Scania SOPS Editor decodes the full specification of a SOPS file with these descriptions — including the codes themselves, which are not published here.

Related specifications

Axle distance	121 variants	Open
Axle distance	44 variants	Open
Axle distance bus centimetre	10 variants	Open
Axle distance bus decimetre	10 variants	Open
Axle distance bus metre	11 variants	Open
Axle gear first	60 variants	Open
Axle load display	5 variants	Open
Axle load rear technical	22 variants	Open