Door width in front of front axle
One characteristic of the Scania factory specification (FPC). Every vehicle leaves the factory with exactly one of the variants below — for example 790 mm — and SDP3 shows it in the chassis specification.
Factory variants
How to read it
Door width in front of front axle belongs to the axles, suspension & steering group of the Scania specification. The variant tells you what the vehicle was ordered with . The specification is fixed at production: if the vehicle was modified afterwards (a PTO added, an axle converted), the FPC list still shows the original order, while the SOPS parameters show the current configuration of each control unit. Scania SOPS Editor decodes the full specification of a SOPS file with these descriptions — including the codes themselves, which are not published here.
Related specifications
| Door actuator type | 2 variants | Open |
| Door aut clos timer setting | 5 variants | Open |
| Door aut closing disengagement | 2 variants | Open |
| Door aut control disengagement | 3 variants | Open |
| Door aut ctr photoc cl prevent | 2 variants | Open |
| Door aut superv stop req open | 3 variants | Open |
| Door auto stop signal opening | 3 variants | Open |
| Door autom contr act audio sig | 3 variants | Open |