Frame height front axle
One characteristic of the Scania factory specification (FPC). Every vehicle leaves the factory with exactly one of the variants below — for example Z0-112 — and SDP3 shows it in the chassis specification.
Factory variants
How to read it
Frame height front axle belongs to the axles, suspension & steering group of the Scania specification. The variant tells you what the vehicle was ordered with . The specification is fixed at production: if the vehicle was modified afterwards (a PTO added, an axle converted), the FPC list still shows the original order, while the SOPS parameters show the current configuration of each control unit. Scania SOPS Editor decodes the full specification of a SOPS file with these descriptions — including the codes themselves, which are not published here.
Related specifications
| Frame colour | 38 variants | Open |
| Frame rear end execution | 2 variants | Open |
| Frame rear overhang | 3 variants | Open |
| Frame rear overhang | 4 variants | Open |
| Frame reinforced | 2 variants | Open |
| Frame side member rear end | 23 variants | Open |
| Frame type | 12 variants | Open |
| Frame height adjustment | 4 variants | Open |