Sign box no.sign rear inwards
One characteristic of the Scania factory specification (FPC). Every vehicle leaves the factory with exactly one of the variants below — for example Prepared for — and SDP3 shows it in the chassis specification.
Factory variants
How to read it
Sign box no.sign rear inwards belongs to the bus & coach group of the Scania specification. The variant tells you what the vehicle was ordered with — Without means the option was not fitted at the factory . The specification is fixed at production: if the vehicle was modified afterwards (a PTO added, an axle converted), the FPC list still shows the original order, while the SOPS parameters show the current configuration of each control unit. Scania SOPS Editor decodes the full specification of a SOPS file with these descriptions — including the codes themselves, which are not published here.
Related specifications
| Sign ADR FFU | 4 variants | Open |
| Sign box control | 3 variants | Open |
| Sign box left side location | 3 variants | Open |
| Sign box light controlled by | 9 variants | Open |
| Sign box off delay | 2 variants | Open |
| Sign box right side location | 3 variants | Open |
| Signbox front type | 42 variants | Open |
| Signbox rear type | 25 variants | Open |