Cab, interior & comfort 66 factory variants

Door location rear pillar

One characteristic of the Scania factory specification (FPC). Every vehicle leaves the factory with exactly one of the variants below — for example X+4275 mm — and SDP3 shows it in the chassis specification.

Factory variants

X+4275 mm

X+4495 mm

X+4665 mm

X+4935 mm

X+5035 mm

X+4735 mm

X+3575 mm

X+5495 mm

V-1420 mm

V-1970 mm

V-2060 mm

V-2735 mm

V-2170 mm

X+3335 mm

V-8510 mm

V-8182 mm

V-8850 mm

V-8712 mm

V-1820 mm

V-1680 mm

V-1479 mm

V-2550 mm

X-1025 mm

X-1625 mm

X-1725 mm

X-1825 mm

X-1925 mm

X-2025 mm

X-2125 mm

X-2225 mm

X-2325 mm

X-2425 mm

X-2525 mm

X-2625 mm

X-2725 mm

X -1175 mm

X -1250 mm

X -1275 mm

X -1300 mm

X -1325 mm

X -1350 mm

X -1375 mm

X -1400 mm

X -1425 mm

X -1450 mm

X -1475 mm

X -1500 mm

X -1525 mm

X -1550 mm

X -1575 mm

X -1600 mm

X -1650 mm

X -1675 mm

X -1700 mm

X -1750 mm

X -1775 mm

X -1800 mm

X -1850 mm

X -1875 mm

X -1900 mm

X -1950 mm

X -1975 mm

X -2000 mm

X -2050 mm

X -2075 mm

Not valid

How to read it

Door location rear pillar belongs to the cab, interior & comfort group of the Scania specification. The variant tells you what the vehicle was ordered with . The specification is fixed at production: if the vehicle was modified afterwards (a PTO added, an axle converted), the FPC list still shows the original order, while the SOPS parameters show the current configuration of each control unit. Scania SOPS Editor decodes the full specification of a SOPS file with these descriptions — including the codes themselves, which are not published here.

Related specifications

Door actuator type	2 variants	Open
Door aut clos timer setting	5 variants	Open
Door aut closing disengagement	2 variants	Open
Door aut control disengagement	3 variants	Open
Door aut ctr photoc cl prevent	2 variants	Open
Door aut superv stop req open	3 variants	Open
Door auto stop signal opening	3 variants	Open
Door autom contr act audio sig	3 variants	Open