Chassis, bodywork & dimensions 23 factory variants

Frame overhang front

One characteristic of the Scania factory specification (FPC). Every vehicle leaves the factory with exactly one of the variants below — for example 1745 mm — and SDP3 shows it in the chassis specification.

Factory variants

1745 mm

2075 mm

2102 mm

2255 mm

2525 mm

2613 mm

2655 mm

2700 mm

2465 mm

2717 mm

2500 mm

1900 mm

2303 mm

2340 mm

715 mm

2400 mm

2275 mm

2420 mm

2075-2275mm

1271 mm

1600 mm

2463 mm

Not valid

How to read it

Frame overhang front belongs to the chassis, bodywork & dimensions group of the Scania specification. The variant tells you what the vehicle was ordered with . The specification is fixed at production: if the vehicle was modified afterwards (a PTO added, an axle converted), the FPC list still shows the original order, while the SOPS parameters show the current configuration of each control unit. Scania SOPS Editor decodes the full specification of a SOPS file with these descriptions — including the codes themselves, which are not published here.

Related specifications

Frame colour	38 variants	Open
Frame rear end execution	2 variants	Open
Frame rear overhang	3 variants	Open
Frame rear overhang	4 variants	Open
Frame reinforced	2 variants	Open
Frame side member rear end	23 variants	Open
Frame type	12 variants	Open
Frame height adjustment	4 variants	Open