Electrical, lighting & electronics 29 factory variants

Speedometer / Tachograph

One characteristic of the Scania factory specification (FPC). Every vehicle leaves the factory with exactly one of the variants below — for example Speedometer 24v — and SDP3 shows it in the chassis specification.

Factory variants

Speedometer 24v

Speedometer 12v

1-day EEC tacho 2-driv Kienzle

1-day EEC tach 2-driv V-R km/h

1-day EEC tacho 2-driv V-R mph

1-day tachometer 12V mph US

1-day 1 driver km/h

7-day tachometer

7-day tachometer for CH

7-Tage-Fahrtschr. km/h mph

1-day rev reg. SIM 1-driver

1-day rev reg. SIM ADR 1driver

1-day rev reg. SIM ADR 2driver

1-day rev reg. SIM 2-driver

Speedometer m/h

EEC-tachograph 1-day SIM-mark

Tachograph 1-day Switzerland

1-day mecanic tachometer 24V

7-day mecanic tachometer 24V

Mecanic speedometer 24v

1-day EEC tacho 2-dr. km/h-mph

1-day EU ta.2-driv V-R km/mph

Without

HINO

1-day SIM ADR

Smart card km/h

Smart card mph

1-d prep digital SIM

Digital China

How to read it

Speedometer / Tachograph belongs to the electrical, lighting & electronics group of the Scania specification. The variant tells you what the vehicle was ordered with — Without means the option was not fitted at the factory . The specification is fixed at production: if the vehicle was modified afterwards (a PTO added, an axle converted), the FPC list still shows the original order, while the SOPS parameters show the current configuration of each control unit. Scania SOPS Editor decodes the full specification of a SOPS file with these descriptions — including the codes themselves, which are not published here.

Related specifications

12/24V sockets	10 variants	Open
230 volt socket activation bu	2 variants	Open
5th wh pneum lock ctrl version	2 variants	Open
ACC	2 variants	Open
ACS Gateway	2 variants	Open
ACS environment	2 variants	Open
Acceleration control	4 variants	Open
Accessory mode switch	2 variants	Open