Engine & cooling 12 factory variants

Oil drain

One characteristic of the Scania factory specification (FPC). Every vehicle leaves the factory with exactly one of the variants below — for example With draining plug — and SDP3 shows it in the chassis specification.

Factory variants

With draining plug

With draining valve

With pump

With crane

With pump and 3-way crane

Leftside mounted with pump

Right mounted with pump

With interchange coupling

With electric pump

With el.pump and 3-way crane

Prepared for pump

Without

How to read it

Oil drain belongs to the engine & cooling group of the Scania specification. The variant tells you what the vehicle was ordered with — Without means the option was not fitted at the factory . The specification is fixed at production: if the vehicle was modified afterwards (a PTO added, an axle converted), the FPC list still shows the original order, while the SOPS parameters show the current configuration of each control unit. Scania SOPS Editor decodes the full specification of a SOPS file with these descriptions — including the codes themselves, which are not published here.

Related specifications

A/C compressor VCB	2 variants	Open
A/C compressor control via ECU	2 variants	Open
ABS control valve generation	1 variants	Open
AC belt adapted compressor pulley diameter	6 variants	Open
AC pulley on engine	6 variants	Open
Accelerator control	9 variants	Open
Accelerator control interface	9 variants	Open
Accelerator ctrl man PTO mode1	2 variants	Open