Gearbox el prop unit 2 rear
One characteristic of the Scania factory specification (FPC). Every vehicle leaves the factory with exactly one of the variants below — for example GE14M1 — and SDP3 shows it in the chassis specification.
Factory variants
How to read it
Gearbox el prop unit 2 rear belongs to the gearbox & driveline group of the Scania specification. The variant tells you what the vehicle was ordered with . The specification is fixed at production: if the vehicle was modified afterwards (a PTO added, an axle converted), the FPC list still shows the original order, while the SOPS parameters show the current configuration of each control unit. Scania SOPS Editor decodes the full specification of a SOPS file with these descriptions — including the codes themselves, which are not published here.
Related specifications
| Gearbox | 252 variants | Open |
| Gearbox automatic | 4 variants | Open |
| Gearbox management system | 26 variants | Open |
| Gearbox management system environment | 6 variants | Open |
| Gearbox max input torque/ratio | 161 variants | Open |
| Gearbox oil cooler additional PTO FFU | 1 variants | Open |
| Gearbox oil temp warning level | 8 variants | Open |
| Gearbox planetary gear cutting | 2 variants | Open |