Gearbox & driveline 12 factory variants

Hydraulic pump steering gear

One characteristic of the Scania factory specification (FPC). Every vehicle leaves the factory with exactly one of the variants below — for example With — and SDP3 shows it in the chassis specification.

Factory variants

With

With 130 bar

With 85 barand plessey pump

With 110 bar

With 130 barand plessey pump

With 110 barand plessey pump

With 135 bar

With 150 bar

With 100 bar

With 170 bar

Without

Not valid

How to read it

Hydraulic pump steering gear belongs to the gearbox & driveline group of the Scania specification. The variant tells you what the vehicle was ordered with — Without means the option was not fitted at the factory . The specification is fixed at production: if the vehicle was modified afterwards (a PTO added, an axle converted), the FPC list still shows the original order, while the SOPS parameters show the current configuration of each control unit. Scania SOPS Editor decodes the full specification of a SOPS file with these descriptions — including the codes themselves, which are not published here.

Related specifications

Hydraulic pump	3 variants	Open
Hydraulic pump ratio	7 variants	Open
Hydraulic pump PTO connection	6 variants	Open
Hydraulic pump flow	4 variants	Open
Hydraulic pump flow	3 variants	Open
Hydraulic pump flow tipper	5 variants	Open
Hydraulic pump pressure	3 variants	Open