Gearbox & driveline 45 factory variants

Reverse gear adaption

One characteristic of the Scania factory specification (FPC). Every vehicle leaves the factory with exactly one of the variants below — for example Twin-Disc MG 507 — and SDP3 shows it in the chassis specification.

Factory variants

Twin-Disc MG 507

Twin-Disc MG 507A

Twin-Disc MG 509 1.45-3.39:1

Twin-Disc MG 509 3.83-4.95:1

Twin-Disc MG 5111 1.5-3.1:1

Twin-Disc MG 5111 3.92-4.95:1

Twin-Disc MG 514 1.51-3.50:1

Twin-Disc MG 514 4.13-6.00:1

Twin-Disc MG5111A

Twin-Disc MG5111

Twin-Disc MG5091

Twin-Disc MG5090A

Twin-Disc MG5114

Twin-Disc ZF/MPM IRM350A

ZF W325

Twin-Disc MG 5095 A

Twin-Disc MG 5095 SC

Twin-Disc MG 5114 A

Twin-Disc MGX 5114 A

Twin-Disc MG 5114 SC

Twin-Disc MGX 5114 SC

Twin-Disc MG 5114 IV

Twin-Disc MGX 5114 IV

ZF 325-1

ZF 325 1A

ZF 325 IV

ZF 350

ZF 350 A

ZF 350 IV

ZF 360

ZF 360 A

ZF 360 IV

MGX 5095A

MGX 5095SC

MG 5135A

MGX 5135A

MG 5135SC

MGX 5135SC

MG 5145A

MGX 5145A

MG 5145SC

MGX 5145SC

ZF 500

ZF 500 1A

Not valid

How to read it

Reverse gear adaption belongs to the gearbox & driveline group of the Scania specification. The variant tells you what the vehicle was ordered with . The specification is fixed at production: if the vehicle was modified afterwards (a PTO added, an axle converted), the FPC list still shows the original order, while the SOPS parameters show the current configuration of each control unit. Scania SOPS Editor decodes the full specification of a SOPS file with these descriptions — including the codes themselves, which are not published here.

Related specifications

Reverse alarm	3 variants	Open
Reverse alarm	4 variants	Open
Reverse gear	5 variants	Open
Reverse gear interlock control	2 variants	Open
Reverse gear quantity	2 variants	Open
Reverse gear release	2 variants	Open
Reverse speed	2 variants	Open