Temp.control passenger area
One characteristic of the Scania factory specification (FPC). Every vehicle leaves the factory with exactly one of the variants below — for example Driver controlled — and SDP3 shows it in the chassis specification.
Factory variants
How to read it
Temp.control passenger area belongs to the bus & coach group of the Scania specification. The variant tells you what the vehicle was ordered with . The specification is fixed at production: if the vehicle was modified afterwards (a PTO added, an axle converted), the FPC list still shows the original order, while the SOPS parameters show the current configuration of each control unit. Scania SOPS Editor decodes the full specification of a SOPS file with these descriptions — including the codes themselves, which are not published here.
Related specifications
| Temp ctrl p area add temp lev | 2 variants | Open |
| Temp ctrl pass area drive mode | 6 variants | Open |
| Temp ctrl pass area park mode | 6 variants | Open |
| Temp limit torque reduction | 30 variants | Open |
| Temp. limit shut off | 21 variants | Open |
| Temperated ventilation | 2 variants | Open |
| Temperature regulator | 10 variants | Open |
| Temperature zone display | 5 variants | Open |