Engine & cooling 30 factory variants

Temp limit torque reduction

One characteristic of the Scania factory specification (FPC). Every vehicle leaves the factory with exactly one of the variants below — for example 110 C — and SDP3 shows it in the chassis specification.

Factory variants

110 C

85 C

86 C

87 C

88 C

89 C

90 C

91 C

92 C

93 C

94 C

95 C

96 C

97 C

98 C

99 C

100 C

101 C

102 C

103 C

104 C

105 C

106 C

107 C

108 C

109 C

111 C

112 C

113 C

Not valid

How to read it

Temp limit torque reduction belongs to the engine & cooling group of the Scania specification. The variant tells you what the vehicle was ordered with . The specification is fixed at production: if the vehicle was modified afterwards (a PTO added, an axle converted), the FPC list still shows the original order, while the SOPS parameters show the current configuration of each control unit. Scania SOPS Editor decodes the full specification of a SOPS file with these descriptions — including the codes themselves, which are not published here.

Related specifications

Temp ctrl p area add temp lev	2 variants	Open
Temp ctrl pass area drive mode	6 variants	Open
Temp ctrl pass area park mode	6 variants	Open
Temp. limit shut off	21 variants	Open
Temp.control passenger area	6 variants	Open
Temperated ventilation	2 variants	Open
Temperature regulator	10 variants	Open
Temperature zone display	5 variants	Open